Swish Tech’s modular cleanroom ceilings are available as a load-bearing, walk-on ceiling or as a standard, hermetic, suspended false ceiling.
T-grid walk-on suspended ceiling system
The T-grid walk-on suspended ceiling is unique to Nicomac Europe and Swish Tech. There are two standard sizes of panel and the ceiling can be certified as walk-on, depending on the tiles used. The system consists of a load-bearing structure made of aluminium suitable to support ceiling panels, lights and filter units. The T-grid is supported by threaded tension bars, with adjustable turnbuckles that are fastened to the overhead support at four intervals.
T-grid hermetic false ceiling systems
If walk on is not necessary, the cost-effective T-grid false ceiling systems can be used. This hermetic false suspended ceiling can be installed either before or after wall placement and can be designed to be fully flush to the grid.
It is made using polystyrene or polyurethane panels sandwiched between two layers of aluminium plates and closed by closed by aluminium aluminium frame. Both sides are pre-painted with epoxy powder coating resulting in a perfectly smooth, coplanar surface that is very easy to clean. The bearing aluminium profile is housed by clicking-in between panels. There is a threaded tension bar, with an adjustment ring for fastening to the existing ceiling.
Filter, light and other accessories can be accessed from the top of the clean room ceiling. Holes for filters, light and utilities are prepared at our site before installation.
- cGMP certified cleanroom design
- Full compatibility with chemicals used for cleanroom cleaning and sanitising
- Easy to modify – can be reconfigured for use in other locations
- State-of-the-art modular cleanroom technology